Helios Fan use ELS-VF 100/60/35

"ultra-silence" fan insert with electronic automatic control based on humidity trends, 3 performance levels with airflow rates of 100/60/35 m³/h for intensive, demand-controlled and basic ventilation.

Scroll housing with aerodynamically and acoustically optimised centrifugal impeller, high pressure reserve and low noise level. Sound insulation according to DIN 4109 Part 2.

Tool-free slide-in installation with simultaneous electrical contact through the plug coupling.

Energy-saving capacitor motor in a sealed die-cast aluminium housing. Maintenance-free ball bearings for 40,000 operating hours.

Flat, elegant room-side front panel, winner of multiple design awards, made of high-quality plastic, alpine white.

Air filter (class G2) as a permanent filter (dishwasher-safe) beneath the hinged, closed front panel.

Integrated filter contamination indicator with visual warning for required cleaning.

Control:
Convenient operation with 3 performance levels. The medium or low performance level
can be connected directly for continuous operation and switched using DSEL (item no.: 1306). When the permanently preset humidity value is reached, the high performance level is automatically activated until normal room humidity is restored.
In addition to the automatic humidity function, manual on/off switching with high airflow capacity is possible; overrun time can be selected as 6, 10, 15 or 21 min, and start-up delay as 0 or 45 sec.
Manual control of all three levels is possible using DSEL 3 (item no. 1611).

Performance:
Rated airflow rate=100/60/35 m³/h

Noise:
Sound pressure at AL=10m2 =47/35/26 dB(A), sound power 51/39/30 dB(A)

Degree of protection:
IPX5 (protected against water jets), double-insulated, suitable for installation in zone 1 of wet rooms

Electrical data:
230 V, 50 Hz, 29/18/9 watts,
supply cable: NYM-O, 5x1.5mm2

Dokumente

• Helios_HK_6_0_D_0323_060_063