Zehnder Comfort ventilation unit ComfoSpot 50 with installed Humidity Sensor board and External wall hood
Comfort ventilation of Zehnder – healthy and economical
Regular price:
€1,002.11
Product number:
11756847
Stock:
0
Manufacturer:
Zehnder
Manufacturer number:
527008770
Kostenloser Versand für dieses Produkt
Sicher kaufen mit Trusted Shops
Immer 100 Tage Widerrufsrecht
Bezahlen Sie sicher und schnell mit:
Sofort
VISA
PayPal
RIVERTY
Description
The ComfoSpot50 is a decentralized,
compact Ventilation unit with heat recovery and Enthalpy exchanger. The unit contains a installed humidity sensor board. The Sensor enables a automatic Adjustment the Air volume based on the measured relative Air humidity the Extract air.
for installation is a Wall installation pipe required (Accessories).
The ComfoSpot 50 is in a External wall installed and has a directly outside and Exhaust-air supply via the external wall hood. The Housing consists made of a high-quality Plastic, the inside and External wall hood are with thejeweiligen Wall colour paintable.
The Units housing made of EPP for the Heat and Sound insulation. The high-quality centrifugal fans are with energy-efficient DC motors driven and particularly resistant against Wind loads. Thereby is a economical Operation with high Electrical efficiency possible. The Core component is the Cross-counterflow enthalpy exchanger made of Plastic. With a Temperature change rate of to to 85% and a moisture recovery of to to 74% for
max. Energy recovery, no condensate accumulation, Frost protection control.
Control unit at the Unit can at Bedarfof the Underside of the unit on the top of unit installed are.
in the Unit are 2 Filter ISO Coarse
larger/same 70% (G4) contain,
4 Fan stages, manually switchable, Supply air or Extract air operation, manually Damper closure,
Automatic control operation Humidity control,
Unit can switched off are.
Operation shows Error messages and time controlled Filter replacement at.
Required Accessories:
Wall installation pipe round or square optional Accessories:
external wired Control unit
(ComfoLED)
Pollen filter the filter class ISO
ePM10 larger/same 60% (F7)
The Filter are front-side without tool replaceable.
Units connection 230VAC / 5060Hz
Dimensions: 380 x 376 x 50mm Cowl weight: 6kg, for Outside wall thickness: 335
600mm, Core drilling: 340mm,
max. Current mount 0,015A,
Power consumption: 415W, Protection class
2, Degree of protection IP11, Airflow rate 15
50cbm/h, Application area: 20 to 40
Degree Celsius, Energy efficiency class:
A, Sound pressure level in 3m Distance,
Free field: 5,229 dB(A), Standardized sound-level difference 48/51 Dn,e,w(dB)
Bew.Sound insulation rating 30/32 Rw(dB)
Damper open/closed quantity: 1 Piece type: ZE ComfoSpot 50 with installed humidity sensor board, External wall hood plastic
1 Piece make: Zehnder Comfosystems
Item number: 527 008 770
Dokumente
Properties
| Degree of protection: | IP 11 |
|---|---|
| Nominal pipe diameter: | 315 mm |
| Height: | 400 mm |
| Width: | 396 mm |
| Material: | Inside-/External wall hood made of paintable Plastic; Unit core made of Expanded Polypropylene (EPP) |
| Airflow rate: | 15 - 25 - 40 - 50 m³/h |
| Heat exchanger type: | Cross counterflow échangeur enthalpique |
| Insulation class: | 2 (protection isolation) |
| Length: | 750 mm |
| Other: | Filterart: Pollenfilter Filterklasse: ISO ePM1 60 % (F7) |
| Rated frequency: | 50 Hz |
| Rated power: | 5bis15(Standby: kW |
| Type of heating: | Cross counterflow échangeur enthalpique |